Odroid Go Super White

Odroid Go Super White

Regular price
Sold out
Sale price
$89.95

ODROID-GO Super hardware design is upgraded version of the OGA . The LCD size changed to 5 inches with a tempered cover glass and, resolution changed  to 854×480 pixels. New OGS has a 4000mAh battery. You can continuously play games for several hours depending on back light brightness.

The OGS is pre-assembled in our factory instead of being a DIY assembled kit. Since there is no built-in slow wireless connectivity, support for a faster USB WIFI+BT was improved. Now the micro-SD card slot is push-push type (spring eject).

 

 


 


Specifications

 

Processor CPU : RockChip RK3326(Quad-Core ARM 64bit Cortex-A35 1.3GHz)
GPU : Mali-G31 MP2
OS Ubuntu 18.04. 19.10 and 20.04 on Kernel 4.4 Aarch64
Modified EmulationStation front-end with Libretro. GPU accelerated OpenGL-ES on DRM-FB
Memory 1GB (DDR3L 786Mhz, 32 Bits bus width)
Storage SPI Flash(16Mbytes Boot), Micro SD Card slot(UHS-1 Capable interface)
Display 5inch 854×480 TFT LCD (Wide viewing angle display, MIPI-DSI interface)
Audio Earphone stereo jack, 0.5Watt 8Ω Mono speaker
Battery Li-Polymer 3.7V/4000mAh(76.5×54.5×7.5mm(L*W*T)), Up to 10 hours of continuous game playing time
DC Jack 5V input, USB-C power connector : A USB -C charging cable is included in the package.
Maximum drawing current: 1.5Amp
External I/O USB 2.0 Host x 1, 10Pin port(I2C, GPIO, IRQ at 3.3Volt)
Input Buttons F1, F2, F3, F4, F5, F6, A, B, X, Y, Direction Pad, Left Shoulder, Right Shoulder, Left Shoulder2, Right Shoulder2, Analog joystick, Analog joystick2
Wireless Optional USB WiFi adapter
Power consumption Game emulation: 350 ~ 600mA (depends on backlit brightness and type of game emulations and the wireless usage), Power off mode: <1mA
Charging time 3.4 ~ 4 hours when the device turns off. When you play game, it takes 4.5 ~ 5.5 hours.
Dimensions 204x86x25 mm, Weight: 280 g (10 oz)

 

 

  • How to use ODROID-GO-SUPER : WIKI

– 8GB or higher capacity MicroSD card is additionally required.

Installing OS image on your SD card


– Force Power OFF

If you have any problem with your ODROID-GO-Super, you will try to switch off.
You can switch off ODROID-GO-Super by pushing the on/off buttons for about 6 seconds.


 

Block Diagram

 

 


 

Header(P2) Description

PIN # GPIO TYPE FUNCTION SYSFS #
1 GND POWER
2 GPIO3_C1 IN/OUT I2S0_8CH_MCLK #113
3 GPIO3_C2 IN/OUT I2S0_8CH_LRCKTX / TDM_FSYNC #114
4 GPIO3_C3 IN/OUT I2S0_8CH_SCLKTX / TDM_SCLk #115
5 GPIO3_C4 IN/OUT I2S0_8CH_SDO0 / TDM_SDO #116
6 3.3V POWER
7 GPIO3_C5 IN/OUT I2S0_8CH_SDI0 / TDM_SDI #117
8 GPIO3_C6 IN/OUT #118
9 GPIO3_C7 IN/OUT #119
10 5.0V POWER